Dell KVM 1082DS Manual de usuario descargar pdf (Pagina 71)

Local and Remote Configurationxxx | xxx61

that power device: Name, Description, Status, Version, Sockets, Vendor Name,

Model, and Input Feeds.

If a target device is connected to a power control device outlet, you can turn on,

turn off or cycle (turn off, then turn on) the target device.

To turn on, turn off or power cycle a target device:

1 From the side navigation bar, click Ports - Power Devices to open the

Power Devices screen.

2 Click the name of the unit you wish to configure and select Outlet List.

3 Select the checkbox to the left of the outlet(s) that you wish to configure.

4 Click On, Off, or Cycle, as desired.

To delete offline power devices:

1 From the side navigation bar, click Ports - Power Devices to open the

Power Devices screen.

2 Click Delete Offline.

To change the minimum on time, off time or wake up state:

1 From the side navigation bar, click Ports - Power Devices to open the

Power Devices screen.

2 Click the name of the unit you wish to configure and select Outlets.

3 Click the outlet name that you wish to modify.

4 Use the drop-down windows to alter the desired settings and click Save.

Associated Target Servers and Power Outlets

In the OBWI Target List page, power control actions are selectable for a target

with linked outlets. Selecting the Ports - Power Devices tabs, and then clicking

on a device name will display the Device Settings, Device Firmware Upgrade,

and Outlet List tabs. Click the Outlet List tab to display the outlets linked with

a target device.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 187 188

Sin comentarios

Dell KVM 1082DS Manual de usuario Pagina 71