Dell PowerVault 122T DLT VS80 (Autoloader) Manual de usuario descargar pdf (Pagina 25)

Front Panel Controls

Back Panel Overview



Choosing a Location

Choose a location that meets the following criteria (see "Technical Specifications"):



Power Switch

Media Door

Front Panel LEDs

Front Panel LCD Screen

Control Keys



68-pin SCSI Connectors

Fan Vent

Power Connector

Bar Code Reader (optional)

NOTE: The arrows indicate the screws on the back of the unit that need to be removed if you want to remove the cover. Three additional

screws on each side of the unit must also be removed in order to lift the top cover.



Standalone

Requirements

Select a location that is flat, sturdy, level, and close to a host server. Do not place the autoloader on the floor or other carpeted

surfaces.

NOTICE: Do not place the autoloader on its side or upside down or stack items that weigh more than 15 KG (33 lb)

on top of the autoloader.

Rack Requirements

Standard 19-inch rack with 2U of clearance.

Room Temperature

10–35ºC (50–95ºF)

Power Source

AC power voltage: 100–127 VAC; 200–240 VAC

Line frequency: 50–60 Hz

NOTE: Locate the AC outlet near the autoloader. The AC power cord is the product's main AC disconnect device and

must be easily accessible at all times.

Weight

10 kg (22 lb)

Air Quality

Minimize sources of particulate contamination. Avoid areas near frequently used doors and walkways, stacks of supplies that

collect dust, printers, and smoke-filled rooms.

NOTICE: Excessive dust and debris can damage tapes and tape drives.

Humidity

20–80% RH

Clearance

Back: Minimum of 15.4 cm (6 in)

Front: Minimum of 30.8 cm (12 in)

Sides: Minimum of 5.08 cm (2 in)

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 38 39

Comentarios a estos manuales

Sin comentarios

Dell PowerVault 122T DLT VS80 (Autoloader) Manual de usuario Pagina 25

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware De La Computadora Dell PowerVault 122T DLT VS80 (Autoloader)