Dell PowerVault 50F (Fibre Channel Switch) Manual de usuario Pagina 10

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 101
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 9
Installing the PowerVault™ 50F Switch: Dell™ PowerVault™ 50F 8-Port Fibre Channel Switch Installation and Troubleshooting Guide
file:///C|/Users/sharon_anand/Desktop/PowerVault/50f_enit/INSTALL.HTM[3/15/2013 11:31:55 AM]
6. Tighten the screws holding the adjustable brackets to the outer slides.
Installing the Switch in the Rack
To install the switch in the rack, perform the following steps:
1. At the back of the rack, carefully align the switch's inner slides with the outer slides on the rack.
Slide the inner slides into the outer slides and push the switch all the way into the rack, as shown in
Figure 1-5. The two safety releases on the slides must be pressed for the switch to slide all the way in.
Figure 1-5. Installing the Switch in the Rack
Vista de pagina 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 100 101

Comentarios a estos manuales

Sin comentarios