Dell PowerVault DP500 Manual de usuario descargar pdf (Pagina 25)

Detailed End-to-End iSCSI Setup 25

You must associate each iSCSI Target with an iSCSI Initiator.

The iSCSI Initiator is the host that requests access to the storage that

is represented by the iSCSI Target name.

•In the

iSCSI Initiators Identifiers

screen, enter the iSCSI

Qualified Name (IQN) of the iSCSI Initiator. You can manually

enter the IQN or use the Browse option and choose the iSCSI

Initiator from the list.

• You can also provide alternate ways to identify the iSCSI Initiator

by using the

Advanced

option. When you click

Advanced

, the

Advanced Identifiers

screen appears. In the

Advanced Identifier

screen, click

Add

, and enter the Identifier type and the specific

identifying information.

•Go to

Advanced Identifier

→

Add

→

Add/Edit Identifier

→

Identifier Type and choose from the four different options IQN,

DNS Domain Name, IP address and MAC Address to add the

Initiator identifier. Figure 2-8 uses the IP address to identify the

iSCSI Initiator. You can use the Browse option to choose the value

from the list of available Targets.

NOTE: iSCSI Initiators are identified by their IQN. You can enter the IQN, use

Browse option, or the Advanced option and use the MAC Address, IP address,

or DNS Domain name of the Initiator. The example in Figure 2-8 uses the IP

address as the Identifier. You can use the Advanced option and repeat similar

steps to add more identifiers.

Figure 2-8. Add/Edit Identifier

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 43 44

Sin comentarios

Dell PowerVault DP500 Manual de usuario Pagina 25