Dell UPS 500T Manual de usuario descargar pdf (Pagina 44)

Operation

Configuring Battery Settings

Configure the UPS settings for an installed EBM, including whether to run automatic battery tests and

automatic restart configuration.

Configuring the UPS for an EBM

If the UPS is not configured for the EBM, the UPS reports less battery time remaining on the UPS front

panel and to any remote software. You may receive a shutdown warning prematurely. To ensure

maximum battery runtime when using power management software, configure the UPS for the EBM:

1 Press the button for one second to go to the main menu selection and scroll down to the

Settings menu using the

button.

2 Press the button to enter the Settings menu.

3 Use the button to scroll to the External Battery Module option and press the button.

The battery number value begins to flash.

4 Set the battery number value using the and buttons.

Configuration

Setting

UPS only (internal batteries) 0 (default)

UPS + 1 EBM 1

NOTE: Runtime is automatically adjusted based on present load levels and whether an EBM is configured.

5 Press the button to confirm.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 62 63

Sin comentarios

Dell UPS 500T Manual de usuario Pagina 44