Dell Dimension 3100C Manual de usuario Pagina 74

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 134
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 73
74 Removing and Installing Parts
4
Press in on the two plastic securing clips on each side of the drive and slide the drive towards the back
of the computer.
NOTICE: Do not pull the drive out of the computer by the drive cables. Doing so may cause damage to cables and
the cable connectors.
5
Lift the drive out of the computer and disconnect the power and hard-drive cables from the drive.
Installing a Hard Drive
1
Check the documentation for the drive to verify that it is configured for your computer.
NOTICE: To avoid damage to the drive, do not set it on a hard surface. Instead, set the drive on a surface, such as
a foam pad, that will sufficiently cushion it.
2
Unpack the replacement hard drive, and prepare it for installation.
3
If your replacement hard drive does not have the plastic hard-drive bracket attached, remove the
bracket from the existing drive by unsnapping it from the drive.
1 securing clips (2) 2 hard drive
1
2
Vista de pagina 73
1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 133 134

Comentarios a estos manuales

Sin comentarios