Dell Dimension 4400 Manual de usuario descargar pdf (Pagina 10)

Adding Cards

1. Shut down the computer.

2. Turn off any attached devices and disconnect them from their electrical outlets.

3. Disconnect the power cable from your computer, and then press the power button to ground the system board.

4. Open the computer cover.

5. To raise the securing lever, press the tab until it is free from the latch and then lift the lever.

6. Insert the card into the connector.



7. Ensure that the card is fully seated in the connector.



CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in "Safety Instructions."

CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover.

NOTICE: To disconnect a network cable, first unplug the cable from your computer and then unplug it from the network wall jack.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 58 59

Sin comentarios

Dell Dimension 4400 Manual de usuario Pagina 10