Dell OptiPlex GX520 Manual de usuario Pagina 168

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 229
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 167
Back to Contents Page
Dell™OptiPlex™GX520User'sGuide
Drives
Drives
Your computer supports:
l One serial ATA drive
l One FlexBay drive (floppy drive or Media Card Reader)
l One CD or DVD drive
General Installation Guidelines
Connect CD/DVD drives to the connector labeled "IDE" on the system board. Serial ATA hard drives should be connected to the connectors labeled "SATA0" or
"SATA2" on the system board.
Connecting Drive Cables
When you install a drive, you connect two cablesa DC power cable and a data cableto the back of the drive and to the system board.
Drive Interface Connectors
Most interface connectors are keyed for correct insertion; that is, a notch or a missing pin on one connector matches a tab or a filled-in hole on the other
connector. Keyed connectors ensure that the pin-1 wire in the cable goes to the pin-1 end of the connector. The pin-1 end of a connector on a board or a card
is usually indicated by a silk-screened "1" printed directly on the board or card.
1
FlexBay for optional floppy drive or Media Card Reader
2
CD/DVD drive
3
hard drive
Serial ATA Connector
1
interface cable connector
2
interface connector
Vista de pagina 167
1 2 ... 163 164 165 166 167 168 169 170 171 172 173 ... 228 229

Comentarios a estos manuales

Sin comentarios