Dell Precision 340 Manual de usuario Pagina 49

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 60
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 48
Heat Sink RemovalMini-Tower Computer
5. Lift the heat sink or heat sink/blower assembly away from the microprocessor.
6. On the small desktop computer, remove the two screws on the blower to remove it from the heat sink.
1
securing clips (2)
4
heat sink
2
latches (2)
5
screws (2)
3
retention base
6
blower
1
securing clips (2)
4
ZIF socket
2
latches (2)
5
retention base
3
tabs (3)
6
heat sink
NOTICE: Gently rock the heat sink and then lift it to remove.
NOTICE: Do not discard the original heat sink and securing clips unless you are installing a microprocessor upgrade kit from Dell. If you are not installing
a microprocessor upgrade kit from Dell, reuse the original heat sink, blower, and securing clips when installing your new microprocessor.
Vista de pagina 48
1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 59 60

Comentarios a estos manuales

Sin comentarios