Dell Precision 360 Manual de usuario descargar pdf (Pagina 20)

Chassis Intrusion Switch: Dell Precision 360 Service Manual

file:///C|/infodev/2013/eDoc/ws360/SM/chsintr.htm[2/18/2013 12:39:37 PM]

Desktop Computer

3. Slide the chassis intrusion switch into its slot and reconnect the cable to the connector on the control panel.

Resetting the Chassis Intrusion Detector

1. Enter system setup by pressing <F2> during the computer's POST.

NOTE: For instructions on using system setup, see the User's Guide.

2. Under the System Security tab, reset the Chassis Intrusion option by pressing the left- or right-arrow key to select

Reset. Change the setting to Enabled, Enabled-Silent, or Disabled.

NOTE: The default is Enabled-Silent.

NOTE: If a setup password has been assigned by someone else, contact the network administrator for information on

resetting the chassis intrusion detector.

3. Press <Alt><b> to restart the computer and implement your changes.

Replacing the Chassis Intrusion Switch

To replace the front panel, perform the removal procedure in reverse order.

Back to Contents Page

1 2 ... 15 16 17 18 19 20 21 22 23 24

Sin comentarios

Dell Precision 360 Manual de usuario Pagina 20