Dell Precision T7610 (Late 2013) Manual de usuario descargar pdf (Pagina 31)

13. Remove the grommets that secure the system fan , lift up the fan and remove it from the fan assembly.

Installing the System Fan

1. Tighten the grommets that secure the system fan to the system-fan module.

2. Connect the system-fan cable to the system-fan module.

3. Install the screws that secure the system-fan module to the chassis.

4. Connect the system-fan cables to their connectors on the system board.

5. Route the system-fan cables out of the opening in the system-fan module in the direction of the system board.

6. Slide the larger air duct downwards into the retention tabs until it is secured to the system-fan module.

7. Slide the smaller air duct downwards into the retention tabs until it is secured to the system-fan module.

8. Install the screws that secure the optical-drive bracket to the chassis.

9. Install:

a. air tunnel (if available)

b. optical drive

c. left cover

10. Follow the procedures in

After Working Inside Your Computer

Removing the I/O Panel and the USB 3.0 Ports

1. Follow the procedures in

Before Working Inside Your Computer

2. Remove:

a. left cover

b. front cover

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 80 81

Sin comentarios

Dell Precision T7610 (Late 2013) Manual de usuario Pagina 31