Dell XPS 710 H2C Manual de usuario descargar pdf (Pagina 31)

Removing and Installing Parts: Dell XPS 710 H2C Edition Service Manual

file:///C|/Preeji_working%20folder/Projects/E-Doc/Dimension%20and%20XPS/xps-710-h2c/SM/parts.htm[3/13/2013 11:45:23 AM]

1 release tab 2 card retainer 3 alignment guide

4 fan bracket

5. Remove the filler bracket or existing card (see Removing PCI and PCI Express Cards

) to create a card- slot opening.

6. Prepare the card for installation.

See the documentation that came with the card for information on configuring the card, making internal connections, or

otherwise customizing it for your computer.

7. Position the card so that it is aligned with the slot and the securing tab (if present) is aligned with the securing slot.

NOTE: If the card is full-length, insert the card guide into the alignment slot on the fan bracket.

1 PCI Express x16 card 2 securing tab 3 PCI Express x16 card slot

NOTICE: Ensure that you release the securing tab to seat the card. If the card is not installed correctly, you may

damage the system board.

8. Gently pull the securing tab (if present) and place the card in the connector. Press down firmly and ensure that the

card is fully seated in the slot.

1 card connector (seated) 2 card connector (not

seated)

3 bracket properly aligned

within slot

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 86 87

Sin comentarios

Dell XPS 710 H2C Manual de usuario Pagina 31