Dell 2100MP Especificaciones descargar pdf (Pagina 22)

1. Turn off the projector and disconnect the power cord.

2. Let the projector cool for at least 30 minutes.

3. Loosen the 2 screws that secure the lamp cover, and remove the cover.

4. Loosen the 3 screws that secure the lamp.

5. Pull up the lamp by its metal handle.

6. Reverse steps 1 through 5 to install the new lamp.

7. Reset the lamp by selecting the left Lamp Reset icon in the OSD

Management tab.

8. Dell may require that lamps replaced under warranty are returned to Dell.

Otherwise, contact your local waste disposal agency for the address of the

nearest deposit site.

CAUTION: Do not touch the bulb or the lamp glass at any time. The bulb may explode due to improper handling, including the touching of the bulb or

the lamp glass.

Back to Contents Page

Downloaded From projector-manual.com DELL Manuals

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 38 39

Sin comentarios

Dell 2100MP Especificaciones Pagina 22