Dell PowerVault MD3220i El manual del propietario descargar pdf (Pagina 135)

Configuration: Disk Groups and Virtual Disks 135

In this example, the

mpath6

device contains two paths:

-- /dev/sdf at Host 1, Channel 0, Target 0, LUN 2

--/dev/sde at Host 0, Channel 0, Target 0, LUN 2

Flush the multi-pathing device mapping using the following command:

# multipath -f /dev/mapper/mapth_x

where

mapth_x

is the device you want to delete.

Delete the paths related with this device using the following command:

# echo 1 > /sys/block/sd_x/device/delete

where

sd_x

is the SD node (disk device) returned by the multipath

command. Repeat this command for all paths related to this device.

For example:

#echo 1 > /sys/block/sdf/device/delete

#echo 1 > /sys/block/sde/device/delete

Remove mapping from MDSM, or delete the LUN if necessary.

If you want to map another LUN or increase volume capacity, perform this

action from MDSM.

NOTE: If you are only testing LUN removal, you can stop at this step.

If a new LUN is mapped or volume capacity is changed, run the following

command:

# rescan_dm_devs

Use the

multipath -ll

command to verify that:

• If a new LUN is mapped, the new LUN is detected and given a multi-

pathing device node

• If you increased volume capacity, the new capacity is displayed.

book.book Page 135 Saturday, September 24, 2011 9:06 AM

1 2 ... 130 131 132 133 134 135 136 137 138 139 140 ... 281 282

Sin comentarios

Dell PowerVault MD3220i El manual del propietario Pagina 135