Back to Contents Page
Camera (Optional)
DellStudio™1435ServiceManual
Removing the Camera
Replacing the Camera
Removing the Camera
1. Follow the instructions in Before You Begin.
2. Follow the instructions in Removing the Display Assembly.
3. Remove the display bezel (see Display Bezel).
4. Remove the two screws securing the camera board.
5. Release the securing tabs and disconnect the camera cable from the camera board connector.
6. Remove the camera board.
Replacing the Camera
1. Align the camera board over the screw holes.
2. Replace the two screws that secure the camera board to the display cover.
3. Connect the camera cable to the connector on the camera board.
4. Replace the display bezel (see Replacing the Display Bezel).
5. Follow the instructions in Replacing the Display Assembly.
Back to Contents Page
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as a connector on the back of the computer).
Comentarios a estos manuales