Dell 6000 Guía de instalación descargar pdf (Pagina 39)

Management Ports | 39

1 - USB-B port

2 - USB-A port

NOTE: Before starting this procedure, be sure you have a terminal emulation program already installed on

your PC. You will need to install the appropriate drivers to support the USB-B port. For assistance, contact

Dell Networking Technical Support.

Step Task

1 Power on the PC (Dell Networking recommends using the XP operating system).

2 Connect the USB-A end of cable into an available USB port on the PC.

3 Connect the USB-B end of cable into the USB-B console port on the S6000-ON.

4 Power on the S6000-ON.

5 Install the necessary USB device drivers (you will need an internet connection).

For assistance, contact Dell Networking Technical Support.

6 Open your terminal software emulation program to access the S6000-ON.

7 Keep the default terminal settings on the S6000-ON console as follows:

• 115200 baud rate

• No parity

• 8 data bits

• 1 stop bit

• No flow control

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 49 50

Sin comentarios

Dell 6000 Guía de instalación Pagina 39