Dell Precision M2300 Guía para resolver problemas Pagina 39

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 42
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 38
17. Remove the four 5-mm hex screws on the back of the computer.
18. Lift the system board out and away from the base.
Installing the System Board
1. Perform all the steps in Removing the System Board in reverse order.
2. Replace the battery (see Before Working Inside Your Computer).
3. Connect the AC adapter to the computer and to an electrical outlet.
4. Turn on the computer.
5. Insert the CD that accompanied the replacement system board into the appropriate drive and flash the system BIOS (see Flashing the BIOS). Follow the
instructions on the screen.
Back to Contents Page
1
fan cable
2
system board
3
base
4
modem cable connectors
CAUTION: Beforeyoubeginanyoftheproceduresinthissection,followthesafetyinstructionsintheDell™ProductInformationGuide.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface, such as a connector on the back of the computer.
NOTICE: When installing the system board, ensure that the fan cable and antenna cables are clear of the system board before fitting it into the base,
that the audio connectors are properly seated, and that the tab for the wireless switch fits properly into the detent on the slider mechanism. Position
both the tab and the slider mechanism in the off position (closest to the display) to ensure correct alignment.
NOTICE: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in
damage to the computer.
NOTE: After replacing the system board, use the CD that accompanied the replacement system board to enter the computer Service Tag into the BIOS.
Vista de pagina 38
1 2 ... 34 35 36 37 38 39 40 41 42

Comentarios a estos manuales

Sin comentarios