Dell B-DCX-4s Manual de usuario descargar pdf (Pagina 10)

10 PowerConnect B-DCX-4S Chassis Replacement Procedure

53-1001800-01

6. Replace the port blades or filler panels (see the DCX-4S Port, Application, and Encryption Blade Replacement

Procedure and see the DCX-4S Blade Filler Panel Replacement Procedure).

7. Replace the cable management fingers (see the DCX-4S Vertical Cable Management Fingers Replacement

Procedure).

8. Connect the power cords to the power supplies and the power outlets.

9. Replace the chassis door (DCX-4S Chassis Door Replacement Procedure).

10. Power-on the PowerConnect B-DCX-4S (“Powering on the PowerConnect B-DX-4S”).

The PowerConnect B-DCX-4S performs a power-on self-test (POST). The POST takes a minimum of three minutes

and is complete when LED activity returns to the standard state.

11. Verify that the PowerConnect B-DCX-4S is powered on and POST is complete (all power LED indicators on the

port, control processor, and core switch blades should be a steady green).

12. Verify that all components are functioning correctly by checking their LEDs. If the LEDs do not indicate correct

operation, try reinstalling the corresponding component.

Verifying correct operation of system

1. Log in to the PowerConnect B-DCX-4S as admin:

switch:admin> login

password: xxxxxxxx

switch:admin>

2. Enter the slotShow command and verify that all the installed cards are detected and that their status is

operational (enabled).

switch:admin> slotShow

Slot Blade Type ID Status

---------------------------------

1 SW BLADE 55 ENABLED

2 UNKNOWN VACANT

3 CORE BLADE 52 ENABLED

4 CP BLADE 50 ENABLED

5 CP BLADE 50 ENABLED

6 CORE BLADE 52 ENABLED

7 UNKNOWN VACANT

8 SW BLADE 51 ENABLED

switch:admin>

3. Verify that the PowerConnect B-DCX-4S is functioning correctly by typing switchShow or switchStatusShow.

This switchShow command displays PowerConnect B-DCX-4S and port status information.

switch:admin> switchshow

switchName: switch

switchType: 62.1

switchState: Online

switchMode: Native

switchRole: Subordinate

switchDomain: 11

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Comentarios a estos manuales

Sin comentarios

Dell B-DCX-4s Manual de usuario Pagina 10

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Dell B-DCX-4s