Dell PowerConnect B-RX Guía de inicio rápido Pagina 7

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 32
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 6
PowerConnect B-RX Series Getting Started Guide 7
53-1001682-03
Items required for installation
This document describes how to set up the PowerConnect B-RX series and mount into 19-inch equipment racks
using the brackets built onto each chassis. To center mount the chassis in a rack, order the mid-mount rack kit from
your PowerConnect supplier. Installation instructions are provided with the rack kit. This section describes items
shipped with the PowerConnect B-RX series and items you will need for installation.
Items shipped with units
The chassis ships with the following components installed:
Switch fabric modules
- Four and eight-slot chassis - two switch fabric modules
- 16-slot chassis - three switch fabric modules
A slot blank in each interface module slot. The slot blank covers a slot that does not currently have a module
installed in it, ensuring proper airflow within the chassis.
Fans
- Four and eight-slot chassis - A fan tray assembly in the front right side of the chassis.
- 16-slot chassis - A fan tray assembly located in the front right side and two fan assemblies located at the
rear of the of the chassis.
Power supplies (AC or DC).
- The four-slot chassis contains one power supply,
- The eight-slot chassis contains two power supplies.
- The 16-slot chassis contains four power supplies.
A 115V AC power cable for each AC power supply you purchase.
Items that you must provide
Assembled 19-inch Electronic Industries Association cabinet (EIA310-D) equipment rack.
Four standard #12-24 pan-head screws for mounting the chassis to equipment racks.
#2 Phillips-head screwdriver.
Flat head screwdriver
Mid-mount rack kit (optional). Order from your PowerConnect supplier.
What you can install
You can install the following components in the different chassis slots.
Four-slot chassis
- Up to two management modules (one active and one redundant).
- Up to three switch fabric modules.
- Up to four interface modules.
- Up to three power supplies (AC or DC).
Vista de pagina 6
1 2 3 4 5 6 7 8 9 10 11 12 ... 31 32

Comentarios a estos manuales

Sin comentarios