Dell PowerEdge R520 Guía de instalación descargar pdf (Pagina 15)

English

3. Select Connector 0 (RAID) or Connector 1 (RAID) > Enclosure

(Backplane) > Physical Disks

Connector 0 and Connector 1 give you access to different hard

drives.

4. In the workspace, locate the hard drive you want to replace.

To help you locate the hard drive, select Blink in the Available

Tasks drop down list then click Execute. The LED indicators on

the selected hard drive will start blinking. Select Unblink and

click Execute to have it stop.

5. For the hard drive you want to replace, select Offline from the

Available Tasks drop down list and click Execute. The hard drive

will be disconnected from the server for removal.

The hard drive is listed as Offline in the Server Administrator.

6. Press the release button on the front left of the hard drive. When

the handle is released, pull the hard drive out of the server.

7. Remove the screws from the side of the hard drive carrier to

remove the hard drive.

8. Install a new hard drive into the carrier then re-attach the screws.

The hard drive connectors should face the back.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 21 22

Sin comentarios

Dell PowerEdge R520 Guía de instalación Pagina 15