Dell Metered Rack Power Distribution Unit Guía de usuario Pagina 55
- Pagina / 90
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
55
Serial Interface Operation
|
Configuring the Network without a DHCP Server
To configure a network without a DHCP server:
1 In the HyperTerminal session window, enter admin at the User prompt, then enter admin at the password
prompt.
2 Type 2 to select Network Settings and press Enter . The Network Settings menu displays (see the following
example).
---------------------------------------------------------
---------------- Network Settings -----------------------
---------------------------------------------------------
1. Read NetworkSettings
2. Modify Network Settings
3. Set Ethernet Speed
0. Exit
Select an option ==> 2
3 At the Select an option prompt, type 2 to configure the network settings manually and press Enter. The
screen displays a series of questions (see the following example).
For each of the following questions, you can press <Return> to select
the value shown in braces, or you can enter a new value.
Should this target obtain IP settings from the network?[N] N
Static IP address [166.99.1.2]? 166.99.21.21
Static IP address is 166.99.21.21
Subnet Mask IP address [255.255.248.0]? 255.255.255.0
Subnet Mask IP address is 255.255.255.0
Gateway address IP address [166.99.17.1]? 166.99.17.1
Gateway address IP address is 166.99.17.1
Wait while your new configuration is saved.
Reset the card to enable the new configuration.
4 Follow the directions to respond to the questions displayed:
Required. Enter the static IP parameters (for IPV4 only).
For all other questions displayed, press Enter to accept the default value (shown in braces), or enter an new
value.
5 When Done displays, type 0 and press Enter to exit.
6 Type 1 and press Enter, then type 2 and press Enter to restart the NMC. The NMC restarts with the new
IP settings in approximately one minute.
7 Network configuration is completed.
NOTE:
See Page 56 though Page 64 for an alphabetical command listing of detailed syntax, query options, and example
responses.
- User's Guide 1
- Notes and Warnings 2
- Table of Contents 3
- 5 LCD Operation 4
- 6 Serial Interface Operation 4
- 7 Web Interface Operation 5
- Introduction 7
- Physical Description 9
- Strain Relief Brackets 10
- Ground Bonding Point 10
- Delta and Wye Configurations 10
- Attached Input Connections 11
- Circuit Breakers 11
- S Dry contact sensor 12
- Finding Information 13
- Safety Warnings 14
- Installation 15
- Inspecting the Equipment 16
- Checking the Accessory Bag 16
- Preparing for Installation 17
- Installing Deep Mounting Pegs 18
- Attaching the Ground Wire 21
- Starting the rPDU 22
- Shutting Down the rPDU 22
- Front Panels 23
- Figure 12. DELLM0002 24
- Figure 13. DELLM0003 24
- Figure 15. DELLM0005 25
- Figure 16. DELLM0006 26
- Figure 17. DELLM0007 26
- External Signaling Ports 27
- Serial Port 28
- Monitoring Ports 29
- Dry Contact Sensor (Optional) 30
- LCD Operation 31
- Input Status Screen 33
- Main Menu Selections 34
- Performance Menu 35
- time and date stamp 38
- Alarms Menu 39
- Event Log 42
- System Info 43
- Settings 43
- Serial Interface Operation 50
- Nomenclature 51
- 4 Go to Step 9 52
- (Three-phase rPDUs only) 56
- Log out of the serial CLI 58
- Web Interface Operation 66
- Accessing the Web Interface 68
- Configuring User Access 69
- Setting the Date and Time 70
- Configuring DPI Attributes 73
- 3 Click Save 76
- Viewing Present rPDU Status 81
- Monitoring Input Statistics 83
- Managing Environment Sensors 86
- Humidity 87
- Viewing Event and Data logs 88
- Clearing Logs 89
- To restart the rPDU NMC: 90
- This procedure is completed 90
Relacionado con productos y manuales para Unidades De Distribución De Energía (Pdu) Dell Metered Rack Power Distribution Unit
(8 paginas)Diodes DFLU1400 Handbücher
Bedienungsanleitungen und Benutzerhandbücher für Hardware Diodes DFLU1400.
Wir stellen 1 PDF-Handbücher Diodes DFLU1400 zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Bedienungsanleitung
Comentarios a estos manuales