search

Dell Networking S5000 Manual de instalación Pagina 33

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 50
  • Tabla de contenidos
  • MARCADORES
    • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 32
Figure 18. Installing a DC Power Supply
1. Slot 0 (for DC PSU 0)
2. Release latch
3. Strip the insulation from the ends of the DC power wires, exposing approximately 13 mm (0.5 inch) of copper wire.
WARNING: Reversing polarity when connecting DC power wires can permanently damage the power supply
or the system.
4. Insert the copper ends into the mating connectors and tighten the captive screws at the top of the mating
connector using a #2 Phillips screwdriver.
WARNING: To protect the power supply from electrostatic discharge, you must cover the captive screws with
the rubber cap before inserting the mating connector into the power supply.
5. Rotate the rubber cap clockwise to fix it over the captive screws.
6. Insert the mating connector into the power supply.
33
Vista de pagina 32
1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 49 50

Comentarios a estos manuales

Sin comentarios
  • Armacost Lighting Ampire Bell Sports Acroprint Mea Nursery
  • JVC Pantallas Led National Instruments Los componentes del chasis Ricoh Impresión y escaneo Epson Lápices stylus Cranium Juguetes De Aprendizaje
  • Sharp CD-MPX850 Philips SBT30BLE Char-Broil 463631810 Philips CD 620 Acer V9800
  • Frigidaire FFCT1278LS Hoja de especificaciones Elenberg MG-2501 Manual de usuario Lenovo IdeaCentre B550 All-in-One Manual de usuario Sennheiser HD 46 Especificaciones Panasonic DMRES25 Instrucciones de operaciones