Dell PowerEdge 750 Guía para resolver problemas descargar pdf (Pagina 56)



Removing Memory Modules



1. Open the system. See "Opening the System" in Troubleshooting Your System."

2. Locate the memory module sockets. See Figure6-1.

3. Press down and out on the ejectors on each end of the socket until the memory module pops out of the socket. See Figure6-8.

4. Close the system. See "Closing the System" in "Troubleshooting Your System."



Processor



It is possible to upgrade your processor to take advantage of future options in speed and functionality. Each processor and its associated internal cache

memory are contained in a pin grid array (PGA) package that is installed in a ZIF socket on the system board.



The following items are included in the processor upgrade kit:

l Processor

l Heat sink



Replacing the Processor



1. Open the system. See "Opening the System" in Troubleshooting Your System."



2. Remove the cooling shroud. See "Removing the Cooling Shroud."

3. Pushing down with one hand on the securing clip's rubber-coated tab, use the other hand to slide the latch on the securing clip away from the heat-

sink post to release the securing clip. See Figure6-9.

4. Remove the securing clip.



5. Repeat step3 and step4 to remove the other securing clip.

Figure 6-9. Installing and Removing the Securing Clip



CAUTION: See your System Information Guide for complete information about safety precautions, working inside the computer, and protecting

against electrostatic discharge.

CAUTION: See your System Information Guide for complete information about safety precautions, working inside the computer, and protecting

against electrostatic discharge.

NOTICE: The processor and heat sink can become extremely hot. Be sure the processor has had sufficient time to cool before handling.

NOTICE: Never remove the heat sink from a processor unless you intend to remove the processor. The heat sink is necessary to maintain proper