Dell SE500W Guía de instalación descargar pdf (Pagina 20)

B2BITS® Cluster Solution (CentOS Linux)

Page 20 of 20

November 13, 2008

Appendix A-3. Dell 1850 PowerEdge BMC controller

configuration.

1) Power on Cluster Node

2) During boot press <Ctrl+E> immediately after you see message:

Press <Ctrl><E> to enter BMC configuration setup

3) Configuration parameters for Cluster Node 1:

Main menu

IPMI over LAN: ON

“IPMI LAN” menu

IP address source: STATIC

Ethernet IP address: 10.0.0.3

Subnet mask: 255.255.255.248

Default gateway: 10.0.0.1

VLan enable: off

“User configuration” menu

Administrator Account: Enabled

Admin account: toor_a

Password: enter any secured password, it will be used in fence device configuration

“Host name” menu

Host name string: node-a-ipmi

Configuration parameters for Cluster Node 2:

Main menu

IPMI over LAN: ON

“IPMI LAN” menu

IP address source: STATIC

Ethernet IP address: 10.0.0.4

Subnet mask: 255.255.255.248

Default gateway: 10.0.0.1

VLan enable: off

“User configuration” menu

Administrator Account: Enabled

Admin account: toor_b

Password: enter any secured password, it will be used in fence device configuration

“Host name” menu

Host name string: node-b-ipmi

4) When configuration is done – press “ESC” and confirm configuration saving. Press

“CTRL+ALT+DEL” after exiting from BMC configuration setup – it enables a new configuration

parameters for IPMILan interface.

1 2 ... 15 16 17 18 19 20

Sin comentarios

Dell SE500W Guía de instalación Pagina 20