Dell PowerConnect 5548p Manual de usuario Pagina 618

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 763
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 617
618 IP Addressing Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\IP_Addressing.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
Syntax
ip name-server
{ server1-ipv4-address | server1-ipv6-address} [server-
address2 … server-address8]
no ip name-server [
server-address
server-address8
]
Parameters
server-address—IP addresses of the name server. Up to 8 servers can be
defined in one command or by using multiple commands. The IP address can
be IPv4 address or IPv6 address. When the IPv6 address is a Link Local
address (IPv6Z address), the outgoing interface name must be specified.
Refer to the User Guidelines for the interface name syntax.
Default Configuration
No name server IP addresses are defined.
Command Mode
Global Configuration mode
User Guidelines
The preference of the servers is determined by the order in which they were
entered.
Up to 8 servers can be defined using one command or using multiple
commands.
The format of an IPv6Z address is: <ipv6-link-local-address>%<interface-
name>
interface-name = vlan<integer> | ch<integer> | isatap<integer> |
<physical-port-name> | 0
integer = <decimal-number> | <integer><decimal-number>
decimal-number = 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9
physical-port-name= Designated port number, for example 1/0/16.
If the egress interface is not specified, the default interface is selected.
Specifying interface zone=0 is equal to not defining an egress interface.
Vista de pagina 617
1 2 ... 613 614 615 616 617 618 619 620 621 622 623 ... 762 763

Comentarios a estos manuales

Sin comentarios