Dell PowerConnect W-Airwave 7.7 Manual de instalación descargar pdf (Pagina 6)

Press Alt-F1 return to this screen.

This step requires no user input, but you can follow the instructions to monitor its progress and switch back to the

installation screen.

Step 4: Checking the AirWave Installation

After the AirWave software installation is complete, the following message appears:

STEP 4: Checking AMP installation

Database is up.

AMP is running version: (version number)

This step requires no user input. Proceed to the next step when prompted to do so.

Step 5: Assigning an IP Address to the AMP System

While the AirWave primary network interface accepts a DHCP address initially during installation, AirWave does not

function when launched unless a static IP is assigned. Complete these tasks to assign the static IP address. The following

message appears:

STEP 5: Assigning AMP's address

AMP must be configured with a static IP.

--------------- Primary Network Interface Configuration -------------

1) IP Address : xxx.xxx.xxx.xxx

2) Netmask : xxx.xxx.xxx.xxx

3) Gateway : xxx.xxx.xxx.xxx

4) Primary DNS : xxx.xxx.xxx.xxx

5) Secondary DNS: xxx.xxx.xxx.xxx

9) Commit Changes

0) Exit (discard changes)

If you want to configure a second network interface, please

use AirWave's web interface, AMP Setup --> Network Tab

1. Enter the network information.

The Secondary DNS setting is an optional field.

2. To commit the changes, type 9 and then press Enter. To discard the changes, type 0 and then press Enter.

Step 6: Naming the AirWave Network Administration System

Upon completion of the previous step, the following message appears:

STEP 6: Naming AMP

AMP is currently set to: New AMP

Please enter a name for your AMP:

At the prompt, enter a name for your AirWave server and press Enter.

Step 7: Generating AMP’s SSL Certificate

Upon completion of the previous step, the following message appears on the screen:

STEP 7: Generating AMP's SSL Certificate

Does AMP have a valid DNS name on your network (y/n)?

1. If AirWave does not have a valid host name on the network, type n at the prompt. The following appears:

Generating SSL certificate for < IP Address >

2. If AirWave has a valid host name on the network, type y at the prompt. The following appears:

6 Dell Networking W-AirWave 7.7 | Installation Guide

1 2 3 4 5 6 7 8 9 10 11 ... 18 19

Sin comentarios

Dell PowerConnect W-Airwave 7.7 Manual de instalación Pagina 6