Dell DX6000G Manual de usuario Pagina 127

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 174
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 126
Installing System Components 127
3
Open the system. See "Opening the System" on page 80.
4
Disconnect the control panel cable at back of the control panel board. See
Figure 3-24.
CAUTION: Do not pull on the cable to unseat the connector. Doing so can damage
the cable.
a
Press the metal tabs on the ends of the cable connector.
b
Gently work the connector out of the socket.
5
Disconnect the display module cable from the control panel board. See
Figure 3-24.
6
Remove the two screws that secure the control panel board to the system
chassis and remove the board.
7
To remove the display module, use a knife or a small flat-blade screwdriver,
insert the blade beneath the front panel of the display and slide the blade
across the bottom to lift the panel outward. See Figure 3-24.
8
Bend the panel upward to allow access to the mounting screws.
9
Remove the two screws that secure the display module to the system
chassis.
10
Remove the display module from the chassis cutout.
book.book Page 127 Wednesday, December 22, 2010 2:13 PM
Vista de pagina 126
1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 173 174

Comentarios a estos manuales

Sin comentarios