Dell KVM 1081AD/ KVM 2161AD Manual de usuario descargar pdf (Pagina 24)

16xxx | Installationxxx

Figure 2.1: 1U Tool-less Configuration

2 Align and seat the front flange pegs in the holes on the front side of the

vertical post (item 2).

3 Repeat this procedure for the second rail.

4 To remove each rail, pull on the latch release button on each flange ear

(item 3) and unseat each rail.

Two-Post Flush-Mount Configuration

1 For this configuration, the castings must be removed from the front side of

each ReadyRails assembly (Figure 2.2, item 1). Use a Torx™ driver to

remove the two screws from each front flange ear (on the switch side of the

rail) and remove each casting. Retain castings for future rack requirements.

It is not necessary to remove the rear flange castings.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 139 140

Sin comentarios

Dell KVM 1081AD/ KVM 2161AD Manual de usuario Pagina 24