Dell PowerEdge 1655MC Manual de usuario descargar pdf (Pagina 11)

2. Select the type of drivers or utilities that you want to update.

3. Click Continue.

4. Select each driver or utility that you want to update.

You are prompted for a location in which to save the files.

5. Select the location where you want to save the files.

The files are in a compressed format.

6. Decompress the files.

The files are now ready to be installed or used on your server.

Utility Partition

The utility partition is a bootable partition on the hard drive that contains system configuration and diagnostic utilities. When implemented, the partition boots

andprovidesanexecutableenvironmentforthepartition'sutilities.Whentheutilitypartitionisnotbooted,itisdesignatedasanon–MS-DOS®partition.

To start the utility partition, turn on or reboot the server module. During POST, press <F10> when the following message appears:

<F10> = Utility Mode

The utility partition provides a text-based interface from which you can run the partition's utilities. To select a menu option, you can either use the arrow keys

to highlight the option and press <Enter> or type the number of the menu option. To exit the utility partition, press <Esc> from the Utility Partition main

menu.

Table2-1 provides a sample list and explanation of the options that appear on the utility partition menu.

Table 2-1. Utility Partition Main Menu Options

Back to Contents Page



NOTE: The utility partition provides only limited MS-DOS functionality and cannot be used as a general-purpose MS-DOS partition.

Option

Description

Run system diagnostics

Runs the system hardware diagnostics. (See your system's Installation and Troubleshooting Guide.)

Run RAID configuration utility

Runs the RAID configuration utility.