Dell PowerEdge C6220 II Manual de usuario Pagina 175

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 349
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 174
Removing and Installing System Components | 175
1 Remove the system-board assembly. See “Removing a System-Board
Assembly" on page 170.
WARNING: The heat sink may be hot to touch for some time after the system has
been powered down. Allow the heat sink to cool before removing it.
CAUTION: Never remove the heat sink from a processor unless you intend to
remove the processor. The heat sink is necessary to maintain proper thermal
conditions.
2 Using a Phillips screwdriver, loosen one of the heat-sink retention
screws. See Figure 3-19.
Wait for 30 seconds for the heat sink to loosen from the processor.
3 Remove the other three heat-sink retention screws.
4 Gently lift the heat sink off the processor and set the heat sink aside
with thermal grease side facing up.
Figure 3-19. Removing and Installing the Heat Sink
1
screw (4)
2
heat sink
Vista de pagina 174
1 2 ... 170 171 172 173 174 175 176 177 178 179 180 ... 348 349

Comentarios a estos manuales

Sin comentarios