Dell PowerEdge Rack Enclosure 4220 Manual de usuario descargar pdf (Pagina 18)

16 Installation Guide

Reversing the Front Door (Optional)

NOTE: Use a 4-mm Allen wrench to remove the front-door hinge bodies from the rack

and reinstall them on the side opposite their original positions. You might need a

stepladder in order to access the Allen bolt that secures the top hinge body to the rack.

To reverse the direction that the front door opens, complete the following steps:

Remove the front door (see "Removing the Front Door" on page 8).

Remove the side panels (see "Removing and Replacing the Side Panels" on

page 12).

Reverse the top hinge body.

Pull the hinge pin slightly upward so that you can access the retention

clip (see Figure 1-7).

Using the needle-nose pliers, remove the retention clip, and slide the

hinge pin out of the hinge body.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 185 186

Sin comentarios

Dell PowerEdge Rack Enclosure 4220 Manual de usuario Pagina 18