Dell PowerEdge RAID Controller 5i Manual de usuario descargar pdf (Pagina 36)

34 Hardware Installation and Configuration

Align the PERC 5/i Adapter to the PCI-E

slot you have selected.

Insert the adapter gently but firmly until the board is firmly seated in the PCI-E slot. See Figure 3-8.

CAUTION: Do not apply pressure to the memory module while inserting the controller into the PCI-E slot.

Applying pressure could break the memory module or damage the DIMM connector.

CAUTION: Electrostatic discharge can damage sensitive components. Always use proper antistatic

protection when handling components. Touching components without using a proper ground can damage

the equipment.

Figure 3-8. Installing the PERC 5/i Adapter

Tighten the bracket screw, if any, or use the system’s retention clips to secure the controller to the

system’s chassis.

Connect the cables from the backplane of the system to the controller. See Figure 3-9.

filler bracket

PERC 5/i Adapter

PCI-E slot

bracket screw

Dell_PERC5_UG.book Page 34 Tuesday, February 13, 2007 6:02 PM

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 111 112

Sin comentarios

Dell PowerEdge RAID Controller 5i Manual de usuario Pagina 36