Dell PowerEdge SC1425 Manual de usuario descargar pdf (Pagina 16)

1-14 Rack Installation Guide

Push the system into the mounting rails until the system stops (see Figure 1-7).

Push in and turn the thumbscrews on each side of the front chassis panel to secure the system

to the rack.

Install the optional front bezel (if applicable). See the procedures for installing the bezel in

the documentation provided with your system.

NOTE: Figure 1-7 applies to the RapidRails, VersaRails, and two-post rack kits.

Installing the Releasable Tie Wraps

The two releasable tie wraps are used to secure your system’s cables to the mounting rails.

Locate the releasable tie wrap attachment points located on the two back mounting-bracket

flanges (see Figure 1-8).

Push the tie wrap’s fastener through the attachment point.

Push the tie wrap’s plunger until it snaps to secure the tie wrap to the mounting rail.

Using the releasable tie wrap, secure your system’s cables to the mounting rail.

Figure 1-8. Installing the Releasable Tie Wraps

mounting rails (2)

releasable tie wraps (2)

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 133 134

Sin comentarios

Dell PowerEdge SC1425 Manual de usuario Pagina 16