Dell PowerVault 210S (SCSI) Manual de usuario descargar pdf (Pagina 15)

support.dell.com Dell PowerVault 200S and 210S Storage Systems Rack Installation Guide 1-1







This document provides instructions for trained service technicians installing Dell

PowerVault 200S and 210S storage systems in a Dell rack. For information on the

stand-alone configuration, see your Installation and Service Guide.

A rack installation kit is available from Dell for installing one or more storage systems

in a Dell rack or other racks that meet the requirements of ANSI/EIA-310-D-92, Inter-

national Electrotechnical Commission (IEC) 297, and Deutsche Industrie Norm (DIN)

41494. One rack kit is required for each storage system that you install in the rack.

"#

The rack kit includes the following items (see Figure 1-1).

NOTE: Some parts may be preinstalled if you ordered a rack-mounted system.



Eight 10-32 x 1/2-inch Phillips flat-head screws



Four 10-32 x 1/2-inch Phillips pan-head screws



Four 6-32 x 3/8-inch Phillips flat-head screws



Eight conical metal washers



Two adjustable rail-mounting flanges (a pair)



Two mounting ears (a pair)



Two support rails (a pair)

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 25 26

Sin comentarios

Dell PowerVault 210S (SCSI) Manual de usuario Pagina 15