Dell PowerVault 221S (SCSI) Manual de usuario descargar pdf (Pagina 11)

Rack Installation Guide 1-7

2 Place a mark 13.3 centimeters (5.25 inches) above the original mark (or count up nine

holes in a rack that meets EIA-310 standards) and mark the rack’s front vertical rails

with a felt-tipped marker or place masking tape where the system’s upper edge will be

located (see Figure 1-4).

Figure 1-4. Marking the Vertical Rails

Installing the RapidRails Mounting Rails

NOTE: If you are installing VersaRails rails, see “Installing the VersaRails Mounting Rails.”

1 At the front of the rack cabinet, position one of the mounting rails so that its

mounting-bracket flange fits between the marks or tape you placed on the rack (see

Figure 1-5).

2 Align the rail mounting-bracket flange (on the front of the rail) with the square holes

in the front vertical rails (see Figure 1-5).

tape marking locations for

top and bottom of system

3-U (5.25 inches) between

rails (drawing is not to

scale)

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 109 110

Sin comentarios

Dell PowerVault 221S (SCSI) Manual de usuario Pagina 11