Dell Powervault LTO6 Manual de usuario descargar pdf (Pagina 55)

Table 5-5. TapeAlert Flags and Descriptions (continued)

TapeAlert Flags Supported by the Tape Drive

30 1Eh Hardware A Set when a hardware failure

occurs that requires that you

reset the tape drive to

recover.

If resetting the drive does not

recover the error, use the

error code from the

single-character display,

library user interface, or SCSI

drive sense data. See

“Descriptions and Corrective

Actions” on page 5-10.

31 1Fh Hardware B Set when the tape drive fails

its internal self tests.

Use the error code on the

single-character display,

library user interface, or SCSI

drive sense data. See

“Descriptions and Corrective

Actions” on page 5-10.

32 20h Interface Set when the tape drive

detects a problem with the

SCSI or LDI (RS-422)

interface.

Locate error code 8 or 9 in

“Descriptions and Corrective

Actions” on page 5-10.

33 21h Eject media Set when a failure occurs that

requires you to unload the

cartridge from the drive.

Unload and reload the tape

cartridge.

34 22h Download fail Set when a field microcode

replacement (FMR) image is

unsuccessfully downloaded

to the tape drive via the SAS

interface.

Ensure that it is the correct

image. Download the FMR

image again.

36 24h Drive temperature Set when the drive's

temperature sensor indicates

that the drive's temperature

is exceeding the

recommended temperature of

the system (see Chapter 6,

“Specifications,” on page

6-1).

See error code 1 in

“Descriptions and Corrective

Actions” on page 5-10.

37 25h Drive voltage Set when the drive detects

that the externally supplied

voltages are either

approaching the specified

voltage limits or are outside

the voltage limits (see

Chapter 6, “Specifications,”

on page 6-1).

See error code 2 in

“Descriptions and Corrective

Actions” on page 5-10.

39 27h Diagnostics required Set when the drive detects a

failure that requires

diagnostics to isolate the

problem.

See error code 6 in

“Descriptions and Corrective

Actions” on page 5-10.

51 33h Tape directory invalid

at unload

Set when the tape directory

on the tape cartridge that

was previously unloaded is

corrupted. The file-search

performance is degraded.

Rebuild the tape directory by

reading all the data.

Chapter 5. Troubleshooting 5-19

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 92 93

Comentarios a estos manuales

Sin comentarios

Dell Powervault LTO6 Manual de usuario Pagina 55

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware De La Computadora Dell Powervault LTO6