Dell Alienware Aurora R3 (Early 2011) Manual de usuario descargar pdf (Pagina 31)

1. Follow the instructions in Before You Begin.



2. Align the screw holes on the processor liquid-cooling assembly with the screw holes on the chassis rear wall.



3. Replace the four screws that secure the processor liquid-cooling assembly to the chassis rear wall.



4. Tighten the four captive screws that secure the processor liquid-cooling assembly to the system board.



5. Connect the processor liquid-cooling assembly cables to the SYS FAN and CPU PUMP connectors on the top lighting-board.



6. Close the PCI shroud (see Closing the PCI Shroud).



7. Replace the left side-panel (see Replacing the Left Side-Panel).



8. Connect your computer and all attached devices to electrical outlets, and turn them on.

Back to Contents Page



CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may

result in damage to the computer.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 63 64

Sin comentarios

Dell Alienware Aurora R3 (Early 2011) Manual de usuario Pagina 31