Dell Dimension 4700C Manual de usuario Pagina 3
- Pagina / 41
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
malfunctions, the color and sequence of the lights identify the problem.
LightPattern
Problem Description
Suggested Resolution
The computer is in a normal "off"
condition or a possible pre-BIOS
failure has occurred.
Plug the computer into a working electrical outlet and press the power button.
A possible processor failure has
occurred.
Contact Dell (see your Owner's Manual).
Memory modules are detected,
but a memory failure has
occurred.
l If you have two or more memory modules installed, remove the modules, reinstall one module
(see your Owner's Manual), and then restart the computer. If the computer starts normally,
reinstall an additional module. Continue until you have identified a faulty module or reinstalled all
modules without error.
l If available, install properly working memory of the same type into your computer (see your
Owner's Manual).
l If the problem persists, contact Dell (see your Owner's Manual).
A possible graphics card failure
has occurred.
l If the computer has a graphics card, remove the card, reinstall it (see your Owner's Manual), and
then restart the computer.
l If the problem still exists, install a graphics card that you know works and restart the computer.
l If the problem persists or the computer has integrated graphics, contact Dell (see your Owner's
Manual).
A possible floppy or hard drive
failure has occurred.
Reseat all power and data cables and restart the computer.
A possible USB failure has
occurred.
Reinstall all USB devices, check cable connections, and then restart the computer.
No memory modules are
detected.
l If you have two or more memory modules installed, remove the modules, reinstall one module
(see your Owner's Manual), and then restart the computer. If the computer starts normally,
reinstall an additional module. Continue until you have identified a faulty module or reinstalled all
modules without error.
l If available, install properly working memory of the same type into your computer (see your
Owner's Manual).
l If the problem persists, contact Dell (see your Owner's Manual).
Memory modules are detected,
but a memory configuration or
compatibility error exists.
l Ensure that no special memory module/memory connector placement requirements exist (see
your Owner's Manual).
l Verify that the memory modules that you are installing are compatible with your computer (see
your Owner's Manual).
l If the problem persists, contact Dell (see your Owner's Manual).
A possible expansion card failure
has occurred.
1. Determine if a conflict exists by removing a card (not a graphics card) (see your Owner's Manual)
and restarting the computer.
2. If the problem persists, reinstall the card that you removed, remove a different card, and then
restart the computer.
3. Repeat this process for each card. If the computer starts normally, troubleshoot the last card
removed from the computer for resource conflicts (see your Owner's Manual).
4. If the problem persists, contact Dell (see your Owner's Manual).
Another failure has occurred.
l Ensure that the cables are properly connected to the system board from the hard drive, CD
drive, and DVD drive (see your Owner's Manual).
l If there is an error message on your screen identifying a problem with a device (such as the
floppy drive or hard drive), check the device to make sure it is functioning properly.
l The operating system is attempting to boot from a device (such as the floppy drive or hard
drive); check system setup (see your Owner's Manual) to make sure the boot sequence is correct
for the devices installed on your computer.
l If the problem persists, contact Dell (see your Owner's Manual).
The computer is in a normal
operating condition after POST.
None.
- Notes, Notices, and Cautions 1
- Troubleshooting Tools 2
- Beep Codes 4
- System Messages 4
- Before You Begin 6
- Reattaching the Front Door 9
- Memory 9
- Installing Memory 10
- Cards 11
- PCI Express Cards 12
- Flash Card Reader 14
- Processor 16
- Installing the Processor 18
- Modem 19
- Power Supply 21
- System Board 22
- Removing the System Board 23
- Replacing the System Board 24
- Battery 25
- Closing the Computer Cover 26
- Specifications 27
- Back to Contents Page 31
- System Setup 32
- Boot Sequence 34
- Clearing CMOS Settings 35
- DC Power Connector P1 38
- DC Power Connector P2 39
- DC Power Connector P3 39
- DC Power Connectors P4 39
Relacionado con productos y manuales para Ordenadores Dell Dimension 4700C
Ordenadores Dell POWEREDGE R610 Manual de usuario
(10 paginas)
(10 paginas)
Ordenadores Dell OptiPlex GX1 Manual de usuario
(108 paginas)
(108 paginas)
Ordenadores Dell OptiPlex GX1p Manual de usuario
(170 paginas)
(170 paginas)
Ordenadores Dell OptiPlex G1 Manual de usuario
(73 paginas)
(73 paginas)
Ordenadores Dell PowerEdge R310 Manual de usuario
(176 paginas)
(176 paginas)
Ordenadores Dell PowerEdge C1100 Manual de usuario
(140 paginas)
(140 paginas)
Ordenadores Dell OptiPlex GX1p Manual de usuario
(70 paginas)
(70 paginas)
Ordenadores Dell OptiPlex GX100 Manual de usuario
(107 paginas)
(107 paginas)
Ordenadores Dell OptiPlex SX270N Manual de usuario
(27 paginas)
(27 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.126 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales