Dell Precision T5400 (Late 2007) Manual de usuario Pagina 201

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 316
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 200
Adding and Replacing Parts 201
a
Enter the system setup program (see
"System Setup
" on page 89),
select
Integrated Audio
, and then change the setting to
Off
.
b
Connect external audio devices to the sound card’s connectors. Do
not connect external audio devices to the microphone,
speaker/headphone, or line-in connectors on the back panel.
19
If you installed a network adapter card and want to disable the integrated
network adapter:
a
Enter the system setup program (see
"System Setup
" on page 89),
select
Integrated NIC
, and then change the setting to
Off
.
b
Connect the network cable to the network adapter cards connectors.
Do not connect the network cable to the network connector on the
back panel.
20
Install any drivers required for the card as described in the card
documentation.
Removing an Expansion Card
1
Follow the procedures in "Before You Begin" on page 151.
2
Remove the computer cover (see "Removing the Computer Cover" on
page 153).
3
Rotate the hard-drive carrier out of the computer (see "Rotating the Hard
Drive Carrier Out of the Computer" on page 156).
4
Press the release tabs on the card retention door towards each other and
pivot the door open.
Because the door is captive, it will remain in the open position.
Vista de pagina 200
1 2 ... 196 197 198 199 200 201 202 203 204 205 206 ... 315 316

Comentarios a estos manuales

Sin comentarios