Dell Active Fabric Manager Manual de instalación descargar pdf (Pagina 17)

Figure 5. Network Configuration Settings

4. Modify the following settings as needed:

– Name — Assign the name of AFM Server

– Device — Assign or select the NIC Card to be used.

– Use DHCP — Select to enable DHCP to assign an IP address to the VM

– Static IP — Specify the static IP Address of the AFM server.

NOTE: To verify connectivity, ping the IP address assigned to the AFM. If the destination host is

unreachable assign the same IP address.

– Netmask — Specify the subnet mask of the static IP address for the AFM Server.

– Default gateway IP — Specify the gateway IP Address of the AFM server.

– Primary DNS Server — Specify the primary DNS server address. To enable the DNS server on AFM Server,

use this option.

– Secondary DNS Server — Specify the secondary DNS server address.

5. Select OK to save your changes.

6. Select Quit to exit this screen.

To configure AFM DNS settings:

1. Select the Configure System option.

2. Select the DNS configuration option.

To navigate between elements, use the Tab and down arrow.

3. Modify the following settings as needed:

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 39 40

Sin comentarios

Dell Active Fabric Manager Manual de instalación Pagina 17