Dell Active Fabric Manager Manual de instalación descargar pdf (Pagina 28)

1. Start a browser.

2. In the URL field, enter the following information using this format to login to the AFM using one of the following URL

syntax:

– http://

vm_ip_address

– https://

vm_ip_address

3. Enter your user name and password. The AFM Setup wizard starts and displays the Introduction screen.

Important: Specify the user name as “superuser”.

Review the Introduction screen.

4. Click the Next button to go to the License Agreement screen.

5. Check the I Accept the terms of the license Agreement option and then the Next button.

The System Screen displays.

6. From the System IP Address pull-down menu, select the IP address to manage the AFM and then click the Next

button.

NOTE: If there are multiple network interface card (NIC) adapter cards on the AFM, select the IP address to

manage the AFM.

The SNMP and CLI screen displays.

7. In the Switch SNMP Configuration area, configure the following settings:

a. In the Read Community String field, enter the read community string; for example, “public”.

b. In the Write Community String field, enter the write community string; for example, “private”.

8. In the Switch CLI Credentials (FTOS CLI user credentials) area, configure the following settings:

a. From the Protocol pull-down menu, select one of the following protocols: Telnet or SSHv2.

b. In the User Name field, enter the user name.

c. In the Password field, enter the password.

d. In the Confirm Password field, enter confirm the password.

e. In the Enable Password field, enter the enable password.

f. In the Confirm Enable Password field, confirm the enable password

9. Click the Next button to go to the Service Protocols screen.

10. In the TFTP/FTP Settings area, select one of the following options:

– Local — Provisioned the AFM as a TFTP or FTP server

Important: When you use the Local option, the TFTP or FTP server must be in the same subnet.

* If you select the local TFTP server option, the TFTP server uses the AFM management IP address.

* If you select the local FTP server option, the FTP server uses the AFM management IP address. Enter the

AFM user name and password.

– Remote — Use an external TFTP/FTP server

* If you select the FTP protocol and remote options, enter the FTP server IPv4 address, user name and

password.

* If you select the TFTP protocol and remote options, enter the TFTP IPv4 address.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 39 40

Sin comentarios

Dell Active Fabric Manager Manual de instalación Pagina 28