Dell Personal Computer Dimension 2100 Manual de usuario descargar pdf (Pagina 21)

To install a card:

1. Remove the computer cover.

2. Rotate the power supply.

3. Choose a system-board card connector for the card.

4. Unscrew and remove the metal filler bracket that covers the card-slot opening for the card slot you intend to use.

5. Insert the card firmly into the system-board card connector.

Align the cutout on the bottom of the card connector with the crossbar in the system-board card connector. Gently rock the card into the

system-board card connector until it is fully seated.

6. When the card is firmly seated in the system-board card connector, secure the card-mounting bracket with the screw you removed in step 4.

To remove a card:

1. Remove the computer cover.

2. Rotate the power supply.

3. Disconnect any cables connected to the card.

4. Remove the screw from the card-mounting bracket.

5. Grasp the card by its top corners, and ease it out of its system-board card connector.

6. If you are removing the card permanently, install a metal filler bracket over the empty card-slot opening in the computer.

Memory

To install a memory module:

1. Remove the computer cover.

Card connector

Card

System-board card connector

Card mounting bracket and screw

NOTE:Installingfillerbracketsoveremptycard-slot openings is necessary to maintain Federal Communications Commission (FCC)

certification of the system. The brackets also keep dust and dirt out of your computer.

Cutouts (2)

Connector

Memory module

Notches (2)

Securing clips (2)

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 43 44

Sin comentarios

Dell Personal Computer Dimension 2100 Manual de usuario Pagina 21