Dell PP04X Guía de usuario Pagina 120

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 162
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 119
120 Before You Begin
NOTICE: If you need to install memory modules in two connectors, install a memory module in the connector
labeled “DIMMA” before you install a module in the connector labeled “DIMMB.”
NOTICE: Insert memory modules at a 45-degree angle to avoid damaging the connector. If the memory module is
not installed properly, the computer may not boot properly. No error message indicates this failure.
NOTE: For optimal performance, identical memory modules should be used in each connector.
4
Ground yourself and install the new memory module:
a
Align the notch in the module edge connector with the tab in the connector slot.
b
Slide the module firmly into the slot at a 45-degree angle, and rotate the module down until it
clicks into place. If you do not feel the click, remove the module and reinstall it.
5
Replace the memory module cover.
NOTICE: If the cover is difficult to close, remove the module and reinstall it. Forcing the cover to close may
damage your computer.
6
Insert the battery into the battery bay, or connect the AC adapter to your computer and an electrical
outlet.
7
Turn on the computer.
As the computer boots, it detects the additional memory and automatically updates the system
configuration information.
To confirm the amount of memory installed in the computer:
1 memory module 2 securing clips (2)
1
2
Downloaded from LpManual.com Manuals
Vista de pagina 119
1 2 ... 115 116 117 118 119 120 121 122 123 124 125 ... 161 162

Comentarios a estos manuales

Sin comentarios