Dell 5dw Guía de usuario descargar pdf (Pagina 63)

Scenario 4: Digital telephone service through a cable provider

Setup 1: Printer is connected directly to a cable modem

Follow this setup if you normally connect your telephone to a cable modem.

To connect:

Connect one end of a telephone cable to the port of the printer.

2 Connect the other end of the cable to the port labeled Phone Line 1 or Phone Port on the cable modem.

The port labeled Phone Line 2 or Fax Port is not always active. You may need to pay extra to your cable provider

if you want to activate the second phone port.

3 Remove the protective plug from the port of the printer, and then connect the telephone to the port.

Tips for this setup:

•

To make sure that the phone port on the cable modem is active, plug an analog telephone into the phone port,

and then listen for a dial tone. If you hear a dial tone, then the port is active.

• If you need two phone ports for your devices but do not want to pay extra, then do not plug the printer into the

second phone port. You can use a phone splitter. Plug the phone splitter into the Phone Line 1 or Phone

Port , and then plug the printer and telephone into the splitter.

Make sure you use a phone splitter, not a line splitter. To make sure that you are using the correct splitter, plug

an analog telephone into the splitter and then listen for a dial tone.

Faxing

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 149 150

Sin comentarios

Dell 5dw Guía de usuario Pagina 63