Dell B2375dnf Guía de usuario Pagina 147

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 359
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 146
3
Load the print material
with the side to be printed on facing up
.
Depending on the paper type you are using, keep the following loading method:
Envelopes: load them with the flap side down and with the stamp area on the top
left side.
Transparencies: load them with the print side up and the top with the adhesive
strip entering the printer first.
Labels: load them with the print size up and the top short edge entering the
printer first.
Preprinted paper: load with the design face up, top edge toward the printer.
Card stock: load them with the print side up and the short edge entering the
printer first.
Pre printed paper: the printed side should be facing down with an uncurled edge
toward the printer.
4
Squeeze the width guide and adjust it to the width of the print material. Do not force
too much, or the paper will be bent, which will result in a paper jam or skew.
- 146 -
Vista de pagina 146
1 2 ... 142 143 144 145 146 147 148 149 150 151 152 ... 358 359

Comentarios a estos manuales

Sin comentarios