Dell B2375dnf Guía de usuario descargar pdf (Pagina 134)

Selecting Paper

Proper paper loading helps prevent jams and ensures trouble-free printing.

To help avoid jams or poor print quality:

•

Always use new, undamaged paper.

•

Before loading paper, know the recommended print side of the paper you are using.

This information is usually indicated on the paper package.

•

Do not use paper that you have cut or trimmed yourself.

•

Do not mix print media sizes, weights, or types in the same source; mixing results in

jams.

•

Do not use coated papers.

•

Remember to change the paper size setting when you use a source that does not

support auto size sensing.

•

Do not remove trays while a job is printing.

•

Ensure that the paper is properly loaded in the source.

•

Flex paper back and forth. Do not fold or crease the paper. Straighten the edges on a

level surface.

Selecting Preprinted Forms and Letterhead paper

Use the following guidelines when selecting preprinted forms and letterhead paper for the

printer:

• Use long grain papers for best results.

• Use only forms and letterheads printed using an offset lithographic or engraved

printing process.

• Choose papers that absorb ink, but do not bleed.

• Avoid papers with rough or heavily textured surfaces.

Use papers printed with heat-resistant inks which have been designed for use in

xerographic copiers. The ink must withstand temperatures of 180°C (356°F) without melting

or releasing hazardous emissions. Use inks that are not affected by the resin in the toner or

the silicone in the fuser. Inks that are oxidation-set or oil-based should meet these

requirements; latex inks might not. If you are in doubt, contact your paper supplier.

Preprinted papers such as letterheads must be able to withstand temperatures up to 180°C

(356°F) without melting or releasing hazardous emissions.

- 133 -

1 2 ... 129 130 131 132 133 134 135 136 137 138 139 ... 358 359

Sin comentarios

Dell B2375dnf Guía de usuario Pagina 134