Dell B2375dnf Guía de usuario Pagina 335

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 359
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 334
zontal stripes
Condition Suggested solutions
Black pages
A
• The toner cartridge may not be installed properly. Remove
the cartridge and reinsert.
• The toner cartridge may be defective and need replacing.
Install a new toner cartridge. See "Replacing the Toner
Cartridge".
• The printer may require repair. Contact a service
representative.
Loose toner
• Clean the inside of the printer. See "Cleaning the Interior".
• Check the paper type and quality. See "Identifying Print Media
Sources and Specifications".
• Install a new toner cartridge. See "Replacing the Toner
Cartridge".
• If the problem persists, the printer may require repair.
Contact a service representative.
Character Voids
Character voids have white areas where they should be solid
black:
A
• If you are using transparencies, try another type of
transparency. Because of the composition of the
transparency, some character voids are normal.
• You may be printing on the wrong surface of the paper. Turn
over the stack of paper in the paper tray.
• The paper may not meet paper specifications. See
"Identifying Print Media Sources and Specifications".
Hori
If horizontally aligned black streaks or smears appear:
AaBbCc
AaBbCc
AaBbCc
• The toner cartridge may be installed improperly. Remove the
toner cartridge and reinsert.
• The toner cartridge may be defective. Install a new toner
cartridge. See "Replacing the Toner Cartridge".
AaBbCc
• If the problem persists, the printer may require repair.
AaBbCc
Contact a service representative.
Curl If the printed paper is curled or the paper does not feed into
the printer:
• Turn over the stack of paper in the paper tray. Also try
rotating the paper 180° in the paper tray.
• Try printing to other rear door.
- 334 -
Vista de pagina 334
1 2 ... 330 331 332 333 334 335 336 337 338 339 340 ... 358 359

Comentarios a estos manuales

Sin comentarios