Dell OpenManage Server Administrator Version 5.5 Manual de usuario descargar pdf (Pagina 174)

172 Using the Storage Management Service

Example for SAS Controllers

To unassign the dedicated hot spare described in this example, enter:

omconfig storage vdisk action=

assigndedicatedhotspare controller=1 vdisk=4

pdisk=0:2:3 assign=no

omconfig Check Consistency

Use the following omconfig command syntax to initiate a check consistency

on a virtual disk. The check consistency task verifies the virtual disk’s

redundant data.

Complete Syntax

omconfig storage vdisk action=checkconsistency

controller=id vdisk=id

where id is the controller ID and virtual disk ID as reported by the omreport

command. To obtain these values, enter omreport storage controller to display

the controller IDs and then enter omreport storage vdisk controller=ID to

display the IDs for the virtual disks attached to the controller.

Example Syntax

To run a check consistency on virtual disk 4 on controller 1, enter:

omconfig storage vdisk action=checkconsistency

controller=1 vdisk=4

omconfig Cancel Check Consistency

Use the following omconfig command syntax to cancel a check consistency

while in progress.

Complete Syntax

omconfig storage vdisk action=

cancelcheckconsistency controller=id vdisk=id

where id is the controller ID and virtual disk ID as reported by the omreport

command. To obtain these values, enter omreport storage controller to

display the controller IDs and then enter omreport storage vdisk controller=ID

to display the IDs for the virtual disks attached to the controller.

1 2 ... 169 170 171 172 173 174 175 176 177 178 179 ... 261 262

Sin comentarios

Dell OpenManage Server Administrator Version 5.5 Manual de usuario Pagina 174