Dell Dimension 4600C Especificaciones descargar pdf (Pagina 15)

8. Align the notch on the bottom of the module with the crossbar in the connector.



9. Insert the module into the connector until the module snaps into position.



If you insert the module correctly, the securing clips snap into the cutouts at each end of the module.



10. Close the computer cover.

11. Attach the computer stand (optional).



12. Connect your computer and devices to electrical outlets, and turn them on.

13. Right-click the My Computer icon and click Properties.

14. Click the General tab.

15. To verify that the memory is installed correctly, check the amount of memory (RAM) listed.



Removing Memory



1. Shut down the computer through the Start menu.

2. Ensure that your computer and attached devices are turned off. If your computer and attached devices did not automatically turn off when you shut

NOTICE: To avoid damage to the memory module, press the module straight down into the connector while you apply equal force to each end of the

module.

NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Owner's Manual or Product Information

Guide.

NOTE: Memory purchased from Dell is covered under your computer warranty.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 55 56

Sin comentarios

Dell Dimension 4600C Especificaciones Pagina 15