Dell Latitude XPi CD Guía para resolver problemas Pagina 31

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 148
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 30
Customizing System Features 2-7
AC
is set to
DISABLED
.
There are no user-selectable set-
tings for this option. Settings for
BATTERY
are:
The default setting is
1 MINUTE
. To increase battery oper-
ating time, set
HARD-DISK TIME-OUT
to a lower number.
However, if your software requires frequent hard-disk
drive accesses, using a higher time-out setting may save
battery power and time by minimizing the number of
times the hard-disk drive must power up.
NOTE: Set
DISK TIME-OUT
to
DISABLED
if using it causes
compatibility problems with your software.
A change to the
DISK TIME-OUT
option takes effect imme-
diately (rebooting is not required).
If you are not in the System Setup program, you can turn
off the hard-disk drive immediately by pressing
<
FN
><
H
>. The drive resumes normal operation automati-
cally when it is accessed by the microprocessor.
Diskette Drive A
DISKETTE DRIVE A
identifies the type of diskette drive
installed in your computer. There are no user-selectable
settings for the
DISKETTE DRIVE A
option.
Display Close
DISPLAY CLOSE
lets you determine whether your com-
puter enters suspend mode when the display is closed or
whether only the display is turned off when the display is
closed.
SUSPEND
(the default) allows the computer to enter
suspend mode when the display is closed.
ACTIVE
turns off the display, but does not put the
computer into suspend mode.
Display Time-Out
DISPLAY TIME-OUT
lets you decide how long the com-
puter operates with no input/output (I/O) activity before
turning off the display to conserve battery power.
Settings for this option in both
AC
and
BATTERY
are:
The default setting is
4 MINUTES
. To increase battery
operating time, set
DISPLAY TIME-OUT
to a lower number
of minutes.
NOTE: Set the
DISPLAY TIME-OUT
option to
DISABLED
if
using it causes compatibility problems with your
software.
A change to the
DISPLAY TIME-OUT
option takes effect
immediately (rebooting is not required).
If you are not in the System Setup program, you can turn
off the display immediately by pressing <
FN
><
D
>. The
display resumes normal operation automatically when
you press a key or move the cursor.
Expansion Device
EXPANSION DEVICE
shows the type of Dell Latitude
Advanced Port Replicator that is attached to the com-
puter. There are no user-selectable settings for the
EXPANSION DEVICE
option.
External Cache
EXTERNAL CACHE
tells you how much external cache
your computer has. There are no user-selectable settings
for the
EXTERNAL CACHE
option.
Infrared Data Port
INFRARED DATA PORT
allows you to avoid resource con-
flicts by remapping the address of the infrared ports or
disabling one or both ports.
DISABLED
5 MINUTES
15 SECONDS
10 MINUTES
1 MINUTE
15 MINUTES
2 MINUTES
30 MINUTES
3 MINUTES
1 HOUR
4 MINUTES
DISABLED
5 MINUTES
1 MINUTE
10 MINUTES
2 MINUTES
15 MINUTES
3 MINUTES
30 MINUTES
4 MINUTES
1 HOUR
Vista de pagina 30
1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 147 148

Comentarios a estos manuales

Sin comentarios